Showing 1–12 of 34 results

Click to filter

Rockford Fosgate P500X1BD Punch Mono Amplifier

The Punch P500X1bd is a mono amplifier capable of 500 Watts into a 1-Ohm load. The Class-BD technology produces bass more efficiently over traditional amps, and its frequency response allows it to be optimized for subwoofers

Rockford Fosgate P400X2 Punch 2 channel Amplifier

The Punch P400X2 is a 2-channel stereo amplifier capable of producing 200 Watts into each channel at 2-Ohms. The P400X2 amplifier is great with full-range or component systems or can be bridged for use with 2 or more subwoofers.

Rockford Fosgate R250X1 Prime Mono Amplifier

The PRIME R250X1 is a mono amplifier featuring a compact chassis capable of producing 250 Watts of pure Rockford Fosgate power into 2-Ohms. The frequency response of the R250X1 allows it to be used exclusively with subwoofers.

Rockford Fosgate R150X2 Prime 2 channel Amplifier

The PRIME R150X2 is a 2-channel amplifier that can pump-out 75 Watts into both channels at 2-Ohms, making it perfect for full-range or component speakers. The R150X2 can also run in bridged/mono mode for use with subwoofers.

Rockford Fosgate T600-4 4 channel Amplifier

The Power T600-4 is a 4-channel amplifier capable of producing 150 Watts into each of its four channels at 2-Ohms. The T600-4 can run a 4-way full-range system or use component speakers on the front with subwoofers on the rear.

Alpine PDX-F6GC Professional Series 4 channel Power Amplifier

The PDX Professional Series are a special collection that elevates PDX to new heights of prestige with their luxurious and gorgeous gold aluminium finish. The first true audiophile class-D amplifiers have never been so remarkably beautiful and elegant. With precision design and UltraBlu technology PDX delivers unsurpassed definition. Rivalling even the best high-end amplifiers, PDX set the benchmark with a frequency range of 5Hz–400Hz (mono) and 5Hz–100kHz (4ch).

Alpine PDX-M12 Mono Power Amplifier

This audiophile range of PDX series amplifiers are designed and engineered for ultimate sound quality, power, performance and reliability. These sleek and stylish amplifiers have been re-designed from the ground up to deliver an amplifier range that not only look amazing, they perform flawlessly. Incorporating new technology to maximise sonic quality, the new PDX amplifiers deliver extremely low distortion levels, wide bandwidth and industry leading S/N ratios. The new PDX amplifiers have an exceptionally high damping factor, more than 1000 for the mono model PDX-M12. What's more, the all-new PDX amplifiers are 20% smaller than the first generation models and their unique stacking design allows for a large multi amplifier system to be installed virtually anywhere. These new PDX amplifiers are for the true car audio enthusiast, providing exceptional sound quality and performance.

Alpine PDX-M6 Mono Power Amplifier

With precision design and UltraBlu technology PDX deliver unsurpassed definition. Rivalling even the best high-end amplifiers, PDX set the benchmark with a frequency range of 5Hz-400Hz (mono) and 5Hz-100kHz (4ch). Unique to PDX, distortion decreases at higher frequencies, resulting in a clean signal where your ear is most sensitive to distortion. -<0.005% THD+N @ 1W, <0.05% THD+N @ rated power. What's more, PDX are capalable of S/N ratios up to 123dB S/N ar rated power for unprecedented clarity. Delivering ultra-low impedance, PDX are highly stable for tight bass and superb sound with a dampening factor rating at >1000 (Mono) and >500 (4ch). With tremendous headroom and low distortion, PDX have a high total system efficiency of ~80% (power supply >90%, output stage >90%). PDX. The new rival in audiophile amplifiers.

Alpine PDX-V9 5 channel Power Amplifier

With precision design and UltraBlu technology PDX deliver unsurpassed definition. The PDX-V9 Power Density Amplifier is 50% more powerful than the previous PDX-5, while remaining extremely slim and compact. It can deliver a maximum of 1600W of reliable power and 100W x 4 or 200W x 2 (RMS), plus 500W mono (RMS). Plus, exactly the same power is available with a 4-ohm or 2-ohm connection. The improved power supply ensures highly efficient operation at all power levels and loads, and it also has a new Dynamic Power Management System that maintains stable output under all conditions. In every measurable category, the PDX-V9 sets a new standard of excellence. It achieves amazing performance in terms of wide bandwidth, low noise, low distortion, high damping factor, minimal phase shift and inaudible crosstalk. The PDX-V9 offers outstanding flexibility, so it can be perfectly integrated into various system configurations. In addition, all cables can be quickly and easily connected, even power supply cables.

Alpine S-A55V 5 channel Amplifier

The all-new S-Series amplifiers packs a real punch with even more performance and value to you. Experience hard hitting bass

Rockford Fosgate T1000-1BDCP mono Amplifier

The Power T1000-1bdCP is a 1,000 Watt mono amplifier featuring Constant Power delivering up to 25% more power across all impedance loads. The frequency response of the T1000-1bdCP is optimized exclusively for use with subwoofers.

Rockford Fosgate R600X5 Prime 600 Watt 5-Channel Amplifier

The PRIME R600X5 is a 5-channel amplifier designed to run an entire car audio system! The R600X5 produces up to 75 Watts into each of its four channels with a dedicated subwoofer channel capable of producing 300 Watts into 2-Ohms.